Alphatemp Technology

BASKET | CHECKOUT | Items:, Value:

Call Us: + 44/0 1376 344679
TC-08
TC-08
- 8 CHANNEL THERMOCOUPLE DATA LOGGER
- MEASURES FROM -270°C TO +1820°C
- AUTOMATIC COLD CONJUNCTION COMPENSATION
- HIGH RESOLUTION AND ACCURACY

Channels 8
Resolution 20 bits
Input range ±70 mV
Conversion time 100 ms
Temperature accuracy Sum of ±0.2 % of reading and ±0.5°C
Voltage accuracy Sum of ±0.2 % of reading and ±10 ìV
Thermocouple types supported B, E, J, K, N, R, S, T
Ref: KI-PP222TC-08 
   289.00 
Qty:    
 

TC-08 TERMINAL BOARD

This is an optional terminal board for the TC-08. The screw terminals allow wires to be attached to the data logger without soldering and enable the TC-08 to measure voltages from 0 to +5 V, or 4-20 mA loop current.

TC-08 TERMINAL BOARD
Ref: PP624Terminal board  
   21.00 
Qty:    
 

PT-104 USB PT100 DATA LOGGER

ACCURACY AND RESOLUTION

Although accurate temperature sensors are widely available, it has been difficult to find a measuring device that can take advantage of them without introducing excessive errors. The PT-104 USB, however, is inherently accurate due to its novel design. Rather than relying on voltage references (which tend to be temperaturesensitive) it uses ‘reference’ resistors which are extremely stable (low temperature coefficient and drift). The exact value of each resistor is stored in an EEPROM to provide the ultimate in accuracy (yearly recalibration is recommended). To achieve the 0.001°C resolution, a highly advanced ADC is used that can resolve to better than 1 part in 16 million.

TEMPERATURE

The PT-104 USB measures temperature using platinum resistance thermometers (PRTs). Both common industry standards (PT100 and PT1000) are supported. The unit is compatible with 2, 3 and 4 wire sensors (4 wire PT100 sensors are recommended for accurate measurements). A wide range of PT100 sensors are available for use with the PT-104.

- MEASURES TEMPERATURE, RESISTANCE AND VOLTAGE

- HIGH RESOLUTION AND ACCURACY

- CONNECT VIA USB OR ETHERNET PORT

PT-104 USB PT100 DATA LOGGER

Specification

Specification
Ref: KI-PP682PT-104 USB PT100 DATA LOGGER 
   459.00 
Qty:    
 

PT-104 SCREW TERMINAL ADAPTER

The PT-104 Screw Terminal Adapter is an accessory for the PT-104 Platinum Resistance Data Logger. The adapter allows PT100 probes that are not fitted with a mini-DIN connector to be used with the data logger without the need for any soldering.

PT-104 SCREW TERMINAL ADAPTER
Ref: KI-PP660Terminal board  
   7.00 
Qty:    

spacer
spacer